We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
SKU
5097000
Activator 100 gr. tbv Conloc 683
UV glass glue Conloc
The following are important for UV glass glue.
- At least one side of the glass must be transparent (allowing the UV light to reach the glue)
- Curing by UV lamp
- No filling effect, making UV glue suitable for clean new cracks and exactly smooth areas
- Glues invisibly
- Not suitable for outdoor applications and wet areas unless stated otherwise
- With UV glue, the viscosity is important (degree of flow). If you work vertically, you want a thin liquid (capillary action) and if you work horizontally, you want a thick liquid.
CONLOC-Aktivator 953 20g
Is a ready-to-use, solvent-based, liquid to activating the cure of UV adhesive CONLOC UV 683.
Typical uses: In case of laminated glass and other substrates impermeable to UV-light as well as in case of bonds that cannot be reached by UV light CONLOC UV 683 can be cured with CONLOC Activator without UV radiation. Typical applications are e.g. : bonding glass in U-shaped profiles, fittings and handles that cover each other etc. For bonding laminated glass daylight curing grade CONLOC UV 688 can be used as well.
Application: Adhesion surfaces must be dry, clean and free from dust and substances liable to impair adhesion.
Apply a thin coat of CONLOC Activator to one of the adhesion surfaces. The ratio of activator and adhesive should be approx. 5:95. During a short drying time apply the adhesive to the other adhesion surface and join the parts. Adjustment is possible for several seconds, afterwards do no longer move the parts. Initial adhesion strength is achieved after several minutes, final adhesion strength after about 4 hours. Do not use this method for bonds that require high optical clarity because discoloration of the adhesive cannot be excluded.
Technical specifications:
Material basis: Butyraldehyde / Butylamine compound in org. solvents
Density: approx. 0.8 g / cm³
Consistency: low viscosity
Final Adhesion Strength: after approx. 4 hours
Out of stock
€56.20
| Brands | Conloc |
|---|---|
| Types of glass glue | UV-glue |
Related Products
